₨ 2,650
Availability: 33 in stock
| Specification | Value |
|---|---|
| Shaft bore / Inner diameter (d₁) | 25.4 mm (1 inch) — fits a 1″ shaft |
| Taper seating outer diameter (d) | ≈30 mm — matches the bearing’s tapered bore |
| Sleeve length (B₁) | 27 mm — axial length of sleeve |
| Locknut outer diameter (approx.) | 45 mm — for KM6 locknut seating |
| Thread on sleeve (G) | M30×1.5 — thread size for locking nut |
| Locknut type | KM6 — standard locknut for this size |
| Lock washer type | MB6 — locking device to secure nut |
| Taper ratio | 1:12 standard — typical conical taper for adapter sleeves |
| Approx. Weight | ~0.08–0.10 kg depending on manufacturer |
Precision mounting: Provides secure seating of tapered‑bore bearings on 1 inch shafts without machining steps.
Easy assembly/removal: Standard 1:12 taper and threaded locknut simplify bearing change‑outs and reduce service time.
Includes locking accessories: Typically used with a KM6 locknut and MB6 lock washer for secure axial locking.
Product Name: Adapter Sleeve HE 206 (NTN / Imperial‑Series Bearing Accessory)
Type: Adapter sleeve with locknut and locking washer
Application: Used for mounting tapered‑bore bearings (e.g., 6200K series ball bearings and 20200K series roller bearings with 1 in tapered bore) onto a 1 inch (25.4 mm) diameter plain shaft. Makes installation and removal easy and allows accurate axial positioning without special shaft shoulders.
| Weight | 0.086 kg |
|---|---|
| Dimensions | 30 × 45 × 27 cm |
